- 1、本文档共48页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
推拉式酸洗机组技术方案
Technology Proposal of
8 Thousand MT Push-pull Type Pickling Line
8万吨推拉式酸洗机组
技术方案
Content
目 录
Appendix 1 Process flow, parameter and product
附件 1 工艺流程、参数及产品 Appendix 2 Technology specification of equipment
附件 2 设备技术规格书
Appendix 1
附件一
Process flow, parameter and product
工艺流程、参数及产品
Chapter 1: Product mix产品大纲
Material: Hot rolled common carbon steel
钢种:热轧普碳钢
Strip thickness: 2~4mm带钢厚度
Strip width: 610mm带钢宽度
Specification of final product: 2~4×610 mm成品规格
Coil inside diameter: Φ510mm钢卷内径
Coil outside diameter: Max. Φ1800mm钢卷外径
Max. coil weight: ≤10MT最大卷重
Production capacity: 0 thousand MT/year hot rolled pickled steel coil
产量:万吨/年酸洗热轧钢卷
Working time per year: 6500H年工作时间
Chapter 2: Production capacity
生产能力
Process parameter of pickling section酸洗段工艺参数:
3-section acid tank: 11.75×3=35.25m节酸槽
Pickling medium: HCL酸洗介质盐酸
Pickling concentration: 5~18%酸洗浓度
Pickling temperature: 60~85酸洗温度
Line speed 0m/min. (Max.), pickling time: ≥30s
机组速度0米/分(Max) 酸洗时间:≥30秒
Threading speed: 30m/min.穿带速度
Average specification: 2.5×530平均规格
Average coil weight: 8MT平均卷重
Production capacity calculation机组产量计算
Running direction: from right to left 机组右进左出
Chapter 3: Main technology parameter
主要技术参数
Parameter name
参数名称 Entry
入口 Exit
出口 Strip thickness带钢厚度(mm) 2.0~4.0 2.0~4.0 Strip width带钢宽度(mm) 610 610 Getting across without edge cutting is allowed.
允许不切边通过 Coil inner diameter钢卷内径(mm) Φ508 Φ508 Max. outer diameter of coil钢卷最大外径(mm) Φ1800 Φ1800 Max. coil weight最大卷重(t) 10 10 Line speed机组速度(m/min.) 0 Annual production capacity (10 thousand MT)
年生产能力(万吨) 6 Total length of acid tank酸槽总长度(m) 11.75×3=35.25 Total length of rinsing tank冲洗槽总長度(m) 2×4=8 Picling medium
酸洗介质 Industry HCL, concentration 18%
工业盐酸,浓度为18% Min. pickling time最少酸洗时间(s) ≥30
Chapter 4: Process flow, medium and public facilities工艺流程、介质和公用设施
Process flow工艺流程:
Coil loading→uncoiling→straightening→head cutting, angle cutting→pickling→rinsing
→drying→edge cutting→oil
文档评论(0)