rcc-csg复合材料坝及其计算 study on rcc-csg composite dam and its calculation.pdfVIP

第第4040 卷第卷第1112 期期 第40 卷第 12 期 水力发电 年年 1112 月月 RCC-CSG 复合材料坝及其计算 1,2 1 王丽新 王进廷 (1. 清华大学水沙科学与水利水电工程国家重点实验室, 北京 100084 ； 2. 国电建集团北京勘测设计研究院有限公司, 北京 100024) 摘要 介绍了一种由碾压混凝土与胶凝砂砾石组合形成的 RCC-CSG 复合材料坝, 该坝型可充分发挥坝体强度、 节省材料、 减小环境影响, 且两种材料筑坝方式均为碾压成形, 便于施工。 推导了适用于内外型复合材料层面垂直 应力计算的类均质体公式与抗滑稳定系数计算的分段求和法公式。 通过计算某复合重力坝的单一材料层面与复合材 料层面, 并与有限元计算结果比较, 表明类均质体方法可以很好地描述层面应力分布形态, 分段求和法计算的抗滑 稳定系数与有限元法计算结果误差在允许范围内, 两种方法可用于内外型复合材料层面计算。 关键词 复合材料坝； 胶凝砂砾石； 碾压混凝土； 垂直应力； 抗滑稳定系数 Study on RCC-CSG Composite Dam and its Calculation WANG Lixin1, 2, WANG J inting1 (1. State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing 100084, China; 2. PowerChina Beiji ng Engineering Corporation, Beij ing 100024, China) Abstract: The composite dam, made by Roller Compacted Concrete (RCC) and Cemented Sand Gravel (CSG), has several advantages, including full material strength utilization, less construction material consumption and slight environment impact, and easy construction as both of two materials can being rolled into shape. The formula for calculating vertical stress based on quasi -homogeneous body method and the formula for calculating sliding stability based on standard step method are derived for the composite layers of RCC -CSC composite dam by considering the differences of properties between two materials. A RCC-CSC gravity dam is analyzed by using proposed methods and the results are compared with the results of finite element method. The comparison shows that the quasi-homogeneous body method can well describe s