大功率可编程直流电流源监控系统的开发.pdfVIP

Instrumentation and Equipments 仪器与设备, 2015, 3(4), 106-113 Published Online December 2015 in Hans. /journal/iae /10.12677/iae.2015.34016 Development of Monitoring System on Programmable High-Power DC Current Source Sanfei Ji, Xiangqian Tong, Jinliang Huang School of Automation and Information Engineering, Xi’an University of Technology, Xi’an Shaanxi st th th Received: Nov. 21 , 2015; accepted: Dec. 10 , 2015; published: Dec. 15 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract According to the output current amplitude, frequency and waveform requirements of the pro- grammable DC current source, the structure scheme and the modulation algorithm were designed. The programmable DC current source is composed of PC monitoring system and DC-DC converter controlled by DSP. PC communicates with DSP by the industrial communication bus RS-485. The PC monitoring system based on LabVIEW is developed, which can achieve the modulation and monitoring on DC current source output. The operation results show that the PC monitoring sys- tem satisfies the requirements of device, with simple operation and high reliability. Keywords LabVIEW, Serial Communication, Monitoring System, DC Current Source 大功率可编程直流电流源监控系统的开发 季三飞，同向前，黄金亮 西安理工大学自动化与信息工程学院，陕西 西安 收稿日期：2015年11月21 日；录用日期：2015年12月10 日；发布日期：2015年12月15 日 文章引用: 季三飞, 同向前, 黄金亮. 大功率可编程直流电流源监控系统的开发[J]. 仪器与设备, 2015, 3(4): 106-113. /10.12677/iae.2015.34016 季三飞 等 摘 要 本文针对可编程直流电流源输出电流的幅值、频率、波形可设定的要求，设计