汽车发动机连杆分级加工技术 外文及翻译.docVIP

论文图纸，请联系QQ附件1 Fracture splitting technology of automobile engine connecting rod Abstract The fracture splitting method is an innovative processing technique in the field of the automobile engine connecting rod (con/rod) manufacturing. Compared with traditional method, the technique has remarkable advantages. It can decrease manufacturing procedures, reduce equipment and tools investment and save energy. Hence the total production cost is greatly reduced. Furthermore, the technique can also improve product quality and bearing capability. It provides a high quality, high accuracy and low cost route for producing connecting rods (con/rods). The method has attracted extensive attention and has been used in some types of con/rods manufacturing. The process and its key factors such as materials, notches for fracture splitting, fracture splitting conditions and fracture splitting equipment are discussed in detail. Keywords Automobile engine · Connecting rod · Fracture splitting · New process 1 Introduction In recent years, with the rapid development of the automobile industry, the competition in the international automobile markets has become more severe. New market conditions demand manufacturers employ higher quality, greater efficiency and lower cost manufacturing technology to fabricate automobile parts so as to improve their competitive capability and meet the market requirements. Therefore, many new technologies for producing parts have been developed. The con/rod is an important part of engine and its processing technology has been gaining great intention. The fracture splitting technology of con/rod is an innovative processing technique that appeared in the 1990s. Compared with the traditional method, the process owns the advantages of greatly improving product quality and production efficiency and dramatically reducing cost and energy [1–4]. Therefore, the technology has been studied and applied extensively. Some famous companies, such as GM Ford and C