英MSSoverview拓扑图.pptVIP

MSC Server - separates user and control plane MSC Server system Interfaces ProtocolsRel.4 Network RANAP/BSSAP for radio access control Nc - BICC for call control (also SIP-T) Mc - H.248 for MGW control Nb - AAL2 for user data Nb- RTP for user data over IP AAL5 for signaling over ATM Sigtran for transmitting SS7 signaling over IP Support for All-IP Mobility CoreIMS-CS interworking MSC Server overview the MSC Server is a circuit-switched call control productoffering all GSM and 3G circuit-switched services. the MSC Server allows operators to: provide same CS services as with an MSC combine transport of voice and data (GPRS)in a single transport network optimize signaling and transport networks, separatelypurchase call control and traffic capacity have a clear evolution to IP backbone with the MGW the MSC Server is a functionality which can be upgraded tothe MSCi and TMSCi network elements (2G or 3G) Integrated MSC Server Upgrade from previous MSCi release to contain also MSC Server features Still supports full MSCi functionality Contains Gateway MSC Functionality Visited MSC Functionality Media Gateway Control Function Standalone MSC Server New delivery in M12 without user plane switching Contains only MSC Server features and optimized hardware (e.g. no GSW, ET or modem pools) Note though that same functionalities are present as in Integrated MSC Server except MSCi user plane handling Gateway MSC Functionality Visited MSC Functionality Media Gateway Control Function Also possible to upgrade Integrated MSC Server to Standalone MSC Server (MSSu) by removing user plane switching HW and functionality Gateway Control Server Integrated/Standalone MSC Server Gateway Control Server Location of new functionalities MSC Server adds more signallings MSC Server in a multivendor environment Nokia philosophy on the power of open interfaces also applies in the MSC Server system Nokia has implemented all interfaces according to standardization with the exceptions defined in