中国机械工程学报(英文版)论文模板.doc

DOI: 10.3901/CJME.2014.0320.001, available online at ; ; Novel 6-DOF Wearable Exoskeleton Arm with Pneumatic Force-Feedback for Bilateral Teleoperation ZHANG Jiafan1, 3, *, FU Hailun2, DONG Yiming1, ZHANG Yu1, YANG Canjun1, and CHEN Ying1 1 State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University,Hangzhou 310027, China 2 Zhejiang Province Instituteof Metrology,Hangzhou 310027, China 3 National Die Mold CAD Engineering Research Center, Shanghai Jiao Tong University, Shanghai 200030, China Received March 1, 2014; revised June 17, 2014; accepted August 17, 2014 Abstract: Magnetic drive pump has gotten great achievement and has been widely used in some special fields. Currently, the researches on magnetic drive pump have focused on hydraulic design, bearing, axial force in China, and a new magnetic drive pump with low flow and high head have been developed overseas. However, low efficiency and large size are the common disadvantages for the magnetic drive pump. In order to study the performance of high-speed magnetic drive pump, FLUENT is used to simulate the inner flow field of magnetic drive pumps with different rotate speeds, and get velocity and pressure distributions of inner flow field. According to analysis the changes of velocity and pressure to ensure the stable operation of pump and avoid cavitation. Based on the analysis of velocity and pressure, this paper presents the pump efficiency of magnetic drive pumps with different rotated speeds by calculating the power loss in impeller and volute, hydraulic loss, volumetric loss, mechanical loss and discussing the different reasons of power loss between the magnetic drive pumps with different rotated speeds. In addition, the magnetic drive pumps are tested in a closed testing system. Pressure sensors are set in inlet and outlet of magnetic drive pumps to get the pressure and the head, while the pump efficiency can be got by calculating the power loss between the input power and the outlet