全液压钻机油路板试验台设计和应用.pdf

第43 卷 第3 期 煤田地质与勘探 Vol. 43 No.3 2015 年6 月 COAL GEOLOGY EXPLORATION Jun. 2015 文章编号: 1001-1986(2015)03-0110-05 全液压钻机油路板试验台设计及应用 贠 范 伟，姚宁平，陈 亮， 江剑 ( 中煤科工集团西安研究院有限公司，陕西 西安 710077) : 为保证螺纹插装式油路板加工质量的可靠性，设计油路板试验台。试验台由数据采集控制 系统和液压系统两部分组成。通过研究油路板单向阀泄漏量对压力损失和马达转速的影响规律， 并对液控单向阀反向泄漏量分别进行自动和手动测试，验证了试验台测试结果的有效性和准确性， 这为评估全液压钻机关键零部件加工质量、优化钻机液压系统设计提供了参考依据。 ：螺纹插装式油路板；液压试验台；设计；应用 ：TP306.2 ：A DOI: 10.3969/j.issn.1001-1986.2015.03.023 Design and application of test bench for full hydraulic rig s circuit board FAN Wei, YAO Ningping, CHEN Liang, YUN Jiangjian (Xian Research Institute , China Coal Technology and Engineering Group Corp, Xian 710077, China) Abstract: Circuit board test bench has been created to ensure the reliability of threaded cartridge type circuit board processing quality. This one is composed of two sections: data acquisition system and hydraulic control system. Through the research of the circuit plate check valve leakage effect influence law on the pressure loss and the rota- tional speed of the motor, and with comparison of hydraulic control one-way valve reverse leakage automatic test and manual test results, the validity of the test results and the accuracy was confirmed. It provides a reference for evaluation of full hydraulic drilling rig key parts processing quality and optimization design of hydraulic system. Key words: screw in cartridge type circuit board; hydraulic test bench; design; application [1]