SD卡读写函数(.c)SD卡读写函数(.c).pdf

SD卡读写函数.c /* Includes */ #include SD_SPI.h #include stm32f10x_lib.h #include usart1.h /* Private typedef */ /* Private define */ /* Private macro */ u8 Card_Type = 0x00; //***************************于所移植的硬件相关 ******************************** /* Select SD_SPI Card: ChipSelect pin low */ #define SD_SPI_CS_LOW() GPIO_ResetBits(GPIOD, GPIO_Pin_9) //于所移植的硬件相关 /* Deselect SD_SPI Card: ChipSelect pin high */ #define SD_SPI_CS_HIGH() GPIO_SetBits(GPIOD, GPIO_Pin_9) //于所移植的硬件相关 //电源控制 #define SD_SPI_POWERON() GPIO_ResetBits(GPIOD, GPIO_Pin_10) //于所移植的硬件相关 #define SD_SPI_POWEROFF() GPIO_SetBits(GPIOD, GPIO_Pin_10) //于所移植的硬件相关 //***************************于所移植的硬件相关 ******************************** /* Private function prototypes */ void SPI_Config(void); /* Global Variable */ /* Private functions */ /************************************************************** ***************** * Function Name : SD_SPI_SendCmd 第 1 页 SD卡读写函数.c * Description : Send 5 bytes command to the SD_SPI card. * Input : - Cmd: the user expected command to send to SD_SPI card * - Arg: the command argument * - Crc: the CRC * Output : None * Return : None *************************************************************** ****************/ u8 SD_SPI_SendCmd(u8 Cmd, u32 Arg, u8 Crc) { u8 res = 0xFF; u16 Retry = 0x00; /* Send dummy byte 0xFF */ SD_SPI_WriteByte(DUMMY); /* send byte1 */ SD_SPI_WriteByte(Cmd | 0x40); /* send byte2 */ SD_SPI_WriteByte((u8)(Arg 24)); /* send byte3 */ SD_SPI_WriteByte((u8)(Arg 16)); /* send byte4 */ SD_SPI_WriteByte((u8)(Arg 8)); /* send byte5 */ SD_SPI_WriteByte((u8)(Arg)); /* send CRC: byte6 */ SD_SPI_WriteByte(Crc); //lest read a stuff byte CMD12 数据手册有说明 if(Cmd == 1