风力发电讲座资料Aerodynamics1_Kasten_ohde.pdfVIP

Aerodynamics and Blade Design 1: Basics of Rotor Blade Design Karsten Ohde The Design of Wind Turbines Part 1 of the Training Course Series “Design of Electricity-Producing Wind Turbines” 10 – 18 November 2007 Urumqi K.Ohde
  Aerodynamics and Blade Design 1 1/40 Contents • Wrap-up of the design criteria and targets for rotor blades • Overview of the design process of rotor blades • Repetition: •calculating the dimensioning point •calculating the blade geometry according to Schmitz • New aspects: •calculating partial load behaviour using the blade element momentum method (basic approach) K.Ohde
  Aerodynamics and Blade Design 1 2/40 1 Aim of this Lecture • Understanding the essential aspects of basic aerodynamic considerations • Ensuring we use the same technical terms when discussing more detailed aspects of blade design K.Ohde
  Aerodynamics and Blade Design 1 3/40 Blade Design – Targets and Criteria • Main target: maximum energy yield • maximize power output at partial load • maximize power coefficient at optimum tip speed ratio • However, many further targets exist, some of which have strong influence on the blade design… •minimize structural loads •minimize