光立方程序.docVIP

光立方程序 #include reg52.h #include intrins.h #include string.h #include Binary.h #define uint unsigned int #define uchar unsigned char #define LED P0 #define FLOOR P2 uchar code table[16]= { B0000,B0000,B0000,B0000, //层1 B0000,B0000,B0000,B0000, //层2 B0000,B0000,B0000,B0000, //层3 B0000,B0000,B0000,B0000, //层4 }; void delay(uint xms) { uint i,j; for(i = xms ; i 0 ; i--) for(j=150;j 0;j--); } void Cube_display(uchar array[],uint delay_time) { uchar floor_temp; uchar num; for(;delay_time 0;delay_time--) { for(num = 0,floor_temp = 0x01;num 8;num++) { FLOOR = ~floor_temp; LED = (~array[num]) | 0xf0; delay(1); LED = 0xff; floor_temp = floor_temp 1; } for(num = 8,floor_temp = 0x01;num 16;num++) { FLOOR = ~floor_temp; LED = (~(array[num]) 4) | 0x0f; delay(1); LED = 0xff; floor_temp = floor_temp 1; } } } void clr_display(uchar array[]) { uint array_num; for(array_num = 0;array_num 16;array_num++) { array[array_num] = B0000; } } void main(void) { uchar display_table[16]; uint i1; uint i2; uint i3; uint table_num; uint table_num2; strcpy(display_table,table); while(1) { //图像1开始 display_table[12]=B1111; display_table[13]=B1111; display_table[14]=B1111; display_table[15]=B1111; Cube_display(display_table,6); for(table_num = 12;table_num 0;table_num = table_num-4) { for(i1=1;i1=7;i1++) { table_num2 = table_num-4; if(i1=1) { display_table[table_num]=(display_table[table_num]1); display_table[table_num2