ASME材料采购技术条件.doc

材 料 采 购 技 术 条 件 PURCHASE SPECIFICATION EXHIBIT NO.4-2 REV. NO. 0 PAGE: 工作令号 WORK NO. . 材料采购申请 单号/修改号 MR. NO./REV. 采购说明书号/修改号 PS NO./REV. SA-106B Material Purchase Specification ( Shell Part) SA-106B材料采购技术条件（壳体部件） Pipe 管子 3 2 1 0 修改 REV. 说 明 DESCRIPTION 编 制 PREPARED BY 日 期 DATE 审 核REVIEWED BY 日 期 DATE EXHIBIT NO.4-2 REV. NO. 0 PAGE: 2 工作令号 WORK NO. . 材料采购申请 单号/修改号 MR. NO./REV. 采购说明书号/修改号 PS NO./REV. This specification provides description for purchasing materials. 本说明仅供材料采购使用 Name of Material材料名称 Specification For seamless carbon steel pipe For high-temperature service. 高温用无缝碳钢公称管。 The material shall comply with SA-106, ASME Code SectionⅡ, Part A, 2010 Edition. 本材料是依据ASME 2010版第二卷A 中 SA-106/ SA-106M。 Manufacture 制造要求 The steel shall be killed steel made by one or more of the following processes: open-hearth ,basic-oxygen, or electric-furnace .The primary melting may incorporate separate degassing or refining , and may be followed by second-ary melting , using electroslag remelting or vacuum-arcremelting . If secondary melting is employed , the heat shall be defind as all of ingots remelted a single primary heat. 钢材为镇静钢，应为以下的一种或数种方法炼制：平炉法、氧气顶吹转炉法或是电炉法，一次熔炼可以和单独的脱气或精炼相结合，也可以接着用电渣重溶或真空电弧重溶进行二次熔炼。若进行二次熔炼，炉次的定义为所有一次熔炼同一炉号的重熔锭。 Heat treatment 热处理 The pipe is hot-finished or colddrawned.Colddrawn pipe shall be heat treated after the final cold draw pass at a temperature of 650°C or higher. 管子是热轧或冷拔的。冷拔管应在最后一道冷拔工序后在大于等于650°C的温度下进行热处理。 Chemical Requirements 化学成分 The steel shall conform to the requirements as to chemical composition（Heat Anaysis）prescribed in table 1. 本材料应符合表1规定的化学成分（熔炼成分）。 Table 1 Chemical Requirements C% Mn% P% S% Si% Cr% Cu% Mo% Ni% V% ≤0.30 0.29-1.06 ≤0.035 ≤0.035 ≥0.10 ≤0.40 ≤0.40 ≤0.15 ≤0.40 ≤0.08 EXHIBIT NO.4-2 REV. NO. 0