斯巴鲁汽车IPMREZA WRX STI翼豹维修手册-15. Malfunction Indicator Light.pdfVIP

MALFUNCTION INDICATOR LIGHT ENGINE (DIAGNOSTICS) 15.Malfunction Indicator Light A: PROCEDURE 1. Activation of check malfunction indicator light. Ref. to EN(STi)-46, ACTIVATION OF MALFUNCTION INDICATOR LIGHT, Malfunction Indicator Light. ↓ 2. Check that the malfunction indicator light does not come on. Ref. to EN(STi)-47, MALFUNCTION INDICATOR LIGHT DOES NOT COME ON., Malfunction Indicator Light. ↓ 3. Check that the malfunction indicator light does not go off. Ref. to EN(STi)-49, MALFUNCTION INDICATOR LIGHT DOES NOT GO OFF., Malfunction Indicator Light. ↓ 4. Check that the malfunction indicator light does not blink at a cycle of 3 Hz. Ref. to EN(STi)-50, MALFUNCTION INDICATOR LIGHT DOES NOT BLINK AT A CYCLE OF 3 HZ., Malfunction Indicator Light. ↓ 5. Check that the malfunction indicator light remains blinking at a cycle of 3 Hz. Ref. to EN(STi)-52, MALFUNCTION INDICA- TOR LIGHT REMAINS BLINKING AT A CYCLE OF 3 HZ., Malfunction Indicator Light. EN(STi)-45 MALFUNCTION INDICATOR LIGHT ENGINE (DIAGNOSTICS) B: ACTIVATION OF MALFUNCTION 3) If the diagnosis system senses a misfire which INDICATOR LIGHT could damage the catalyzer, the malfunction indi- cator light will blink at a cycle of 1 Hz. 1) When the ignition switch is turned to ON (engine off), the malfunction indicator light in the combin