Mastercam9.1后处理-FANUC-数控铣.docVIP

Mastercam9.1后处理-FANUC-数控铣 # Post Name : MPFAN # Product : MILL # Machine Name : GENERIC FANUC # Control Name : GENERIC FANUC # Description : GENERIC FANUC MILL POST # Associated Post : NONE # Mill/Turn : NO # 4-axis/Axis subs. : YES # 5-axis : NO # Subprograms : YES # Executable : MP v9.0 # # WARNING: THIS POST IS GENERIC AND IS INTENDED FOR MODIFICATION TO # THE MACHINE TOOL REQUIREMENTS AND PERSONAL PREFERENCE. # # -------------------------------------------------------------------------- # Revision log: # -------------------------------------------------------------------------- # Programmers Note: # CNC 01/12/01 - Initial post update for V8.1, grt # CNC 07/02/01 - Add cantext to cancel drill and tool retract, jph # CNC 01/09/02 - Initial post update for V9.0, rjm # # -------------------------------------------------------------------------- # Features: # -------------------------------------------------------------------------- # This post supports Generic Fanuc code output for 3 and 4 axis milling. # It is designed to support the features of Mastercam Mill V8. # # Following Misc. Integers are used: # # mi1 - Work coordinate system # 0 = Reference return is generated and G92 with the # X, Y and Z home positions at file head. # 1 = Reference return is generated and G92 with the # X, Y and Z home positions at each tool. # 2 = WCS of G54, G55.... based on Mastercam settings. # # mi2 - Absolute or Incremental positioning at top level # 0 = absolute # 1 = incremental # # mi3 - Select G28 or G30 reference point return. # 0 = G28, 1 = G30 # #Canned text: # Entering cantext on a contour point from within Mastercam allows the # following functions to enable/disable. # Cantext value: # 1 = Stop = output the M00 stop code # 2 = Ostop = output the M01 optional stop code # 3 = Bld on = tur