AC800F DDE组态手册.pdfVIP

ControlIT AC 800F Engineering Manual DDE32 Notice Information provided in this manual is subject to change without prior notice and represents no obligation on the part of ABB Automation Products. The industrial standards and regulations (e.g. DIN, VDE, VDI, etc.) applicable in the Federal Republic of Germany are used. Outside the Federal Republic of Germany, the relevant national specifications, standards and regulations must be observed. ABB Automation Products reserves all rights, especially those arising out of BGB, UWG, UrhG as well as out of industrial property rights (patents, utility models, trademarks, service trademarks and flavor samples). The designations used and the products shown/mentioned in this manual have not been specifically marked regarding existing industrial property rights. No part of this manual may be reproduced without prior written permission from ABB Automation Products. Should you find any mistakes in this manual, please make a copy of the appropriate page(s) and send it/them to us with your comments. Any suggestions which may help to improve comprehension or clarity will also be gratefully accepted. Please send your suggestions to: Product Management Dept., DEAPR/LMS-Hannover, Fax: +49 (0)511 6782 701 DigiDDE32 Table of Contents 1 General Description5 1.1 Resources, maximum values and performance6 2 Installation of the DDE Server 7 2.1 Start DigiDDE Setup 8 2.2 Applications for NETDDE10 2.3 Starting multiple DDE Servers (for multiple Freelance systems) 11 2.4 Password to prev