IEC_UL60950信息产品安规研讨会.ppt

信息产品安规要求研讨会 蔡志评 Yasli Tsai IEC 60950 国际标准 标准简介 (IEC60950, UL60950) 概论 适用产品 基本定义 基本观念及相关要求 标准简介 (IEC60950, UL60950) 概论 IEC (International Electrotechnical Commission) 推广标准化之世界性组织。 针对电气与电子领域中标准化的问题，促进国际间的合作。 发行出版各种国际标准。 IEC 60950, EN 60950, UL 60950 Base (IEC 60950) plus National Deviation 标准演进 (IEC60950, UL60950) 标准简介 (IEC60950, UL60950) 适用产品 信息类产品及周边 办公用品 通讯类产品 电源供应器 电路定义 (Circuits Characteristics) AC Mains Supply: External a.c. power distribution system supplying power to the equipment. Primary Circuit: Directly connected to AC Mains Supply. Secondary Circuit: Not Directly connected to AC Mains Supply. Note: IEC60950-1 has new term for DC Mains Supply 电路定义 (Circuits Characteristics) Hazardous Voltage: Voltage exceed 42.4 V peak, or 60 V dc and not meet Limited Current Circuit or TNV Circuit. ELV Circuit (Sec): Voltage not exceed 42.4 V peak, or 60 V dc under normal condition.which is separated from HAZARDOUS VOLTAGE by BASIC INSULATION, and which neither meets all of the requirements for an SELV CIRCUIT nor meets all of the requirements for a LIMITED CURRENT CIRCUIT. SELV Circuit (Sec): Voltage not exceed 42.4 V peak, or 60 V dc under both normal condition and single fault condition. 电击危害的防止 结构要求 接地保护 测试要求 How to Protect Electric Shock – Accessibility Compliance is checked by all of the following: a) inspection; and b) a test with thetest finger, c) a test withtest pin d) a test with thetest probe Construction Requirement Protection From Electric Shock Normally Provide Two Level Protection for USER (Normal Single Fault Condition) B + S = D B + E = Two Levels of Protection R = D B + B = D or two levels of protection PROTECTION AGAINST ELECTRIC SHOCK - Separation Construction Requirement Requirements of Insulation – Electric Strength Requirements The Clearances, Creepage Distances, and Distances Through Insulation Parameters for Determining the Requirements Application Working Voltage Construction Requirement Categories of Insul