T4服务器Solaris操作系统安装截图.docx

T4-4 安装Configuring ILOM With the ILOM CLI and a Serial ConnectionThe default serial port speed is 9600 baud, 8 bits, no parity, 1 stop bit no handshake.Log in to the ILOM SP.User = rootPwd = changemeSet the working directory.cd /SP/network配置ILOM网络管理口的IPsetpendingipaddress=setpendingipdiscovery=staticsetpendingipnetmask=setpendingipgateway=setcommitpending=trueset state=enabledVerify the changes.show /SP/networkLog out of the ILOM SP.ExitConfiguring the SPs Clock Properties via CLITo examine the current settings:- show /SP/clockTo manually set the ILOM clock property values:-set /SP/clock datetime=11281452012- set /SP/clock timezone=ESTConfiguring the SPs Clock Properties via GUIRoot/changeme默认用户名和密码SECURING THE ILOM SERVICE PROCESSOR (SP) (不改)ssh -l root SP-ipaddrset /SP/users/root password=new passwordVerifying the Firmware Versions using the CLI- show /HOST sysfw_versionVerifying the Firmware Versions using the GUIPreparing for the UpdateHOST POWER ON POSTset /HOST/bootmode script=setenv auto-boot? falsePower on the serverstart /SYSstart /HOST/console SPARC T4-4, No KeyboardCopyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved.OpenBoot 4.33.4, 130560 MB memory available, Serial #100325758.Ethernet address 0:21:28:fa:d9:7e, Host ID: 85fad97e.VERIFY / UPGRADE LSI SAS 2008 RAID CONTROLLERSUsing the FCODE Facility (from OBP){0} ok probe-scsi-allokshow-devsselect/pci@400/pci@1/pci@0/pci@0/LSI,sas@0{0} ok show-volumesselect/pci@700/pci@1/pci@0/pci@0/LSI,sas@0{0} ok show-volumes{0} ok show-children9 a create-raid1-volumeShow-volumesDevalias{0} ok boot cdrom –sFromatQuitReboot – cdrom# eeprom auto-boot?=trueEis-补丁打完后，init 6 重启系统，，，看uname -a 版本号有升级