MSP430与液晶显示器..docVIP

MSP430与液晶显示器. /*------------------------------------------------------------------------------*/ //Drive:MSP430F413 //File: LCD1602_8.H //Date: 08-7-29 //Time: 16:09 //Note: LCD1602 Mini Driver. //QQ:269829973 //Mail:wty014198@163.com /*------------------------------------------------------------------------------*/ #ifndef __LCD1602_8_H__ #define __LCD1602_8_H__ /*------------------------------------------------------------------------------*/ //LCD接口定义 //sfr io = 0x80; //P0-0x80,P1-0x90,P2-0xA0,P3-0xB0; //sbit rs = P1^0; //LCD数据/命令选择端(H/L) //sbit rw = P1^1; //LCD读/写选择端(H/L) //sbit ep = P1^2; //LCD使能控制 //sbit bz = io^7; //LCD忙标志位 #define RS BIT7 #define RW BIT6 #define EN BIT5 /*------------------------------------------------------------------------------*/ //函数声明 void lcd_busy(void); //测试LCD忙碌状态程序 void lcd_wcmd(unsigned char cmd); //写入指令到LCD程序 void lcd_wdat(unsigned char dat); //写入数据到LCD程序 void lcd_pos( unsigned char y,unsigned char x); //LCD数据指针位置程序 //void printc(unsigned char CHAR); //显示字符 void prints(unsigned char y,unsigned x,unsigned char n,unsigned char *string); //显示字符串 void lcd_init(void); //LCD初始化设定程序 void lcd_clear(void); void cursor_move(unsigned char yy,unsigned char xx); void delay_nms(unsigned int n) { unsigned int i=0,j=0; for (i=n;i0;i--) for (j=0;j800;j++); //800 } void delay_mini(unsigned char n) { while(n--) { _NOP(); } } /*------------------------------------------------------------------------------*/ //测试LCD忙碌状态 void lcd_busy(void) { unsigned char bz; do{ P5OUT=~(EN); //ep = 0; P5OUT=~(RS); //rs = 0; //指令 P5OUT|=RW; //rw = 1; //读出 P6OUT=0xff; //io = 0xff; P5OUT|=EN; //ep = 1; delay_mini(10); //_nop_(); //高电平读出 1us P6DIR=0;; bz=(P6INBIT7)7; // bz=0; P6DIR=0xff; }while(bz); //bz=1表示忙,bz=0表示空闲 P5OUT=~(EN); //ep = 0; delay