GB/T 28485-2012镀层饰品　镍释放量的测定　磨损和腐蚀模拟法.pdf

ICS 39.060 Y 88 NATIONAL STANDARD OF THE PEOPLES REPUBLIC OF CHINA 中华人民共和国国家标准 GB/T 28485-2012 Coated adornment - Detection of nickel release - Method for simulation of wear and corrosion 镀层饰品 镍释放量的测定 磨损和腐蚀模拟法 Issued on June 29, 2012 Implemented on November 1, 2012 Jointly issued by the General Administration of Quality Supervision, Inspection and Quarantine (AQSIQ) and the Standardization Administration (SAC) of the Peoples Republic of China GB/T 28485-2012 Foreword This standard is drafted according to the rules of GB/T 1.1-2009. This standard is modified from EN 12472:2005+A1:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items(English version). The construction of this standard is made some adjustment comparing with EN 12472:2005+A1:2009. The comparison list about the chapters and clauses between this standard and EN 12472:2005+A1:2009 is given in annex A. There are some technical differences between this standard and EN 12472:2005+A1:2009. The clauses related with those differences have been marked through the vertical single line on the margin. The technical differences are also given in annex B. Please note that some content in this standard may relates to the patents. The issue organization will not take the responsibility for identifying the patents. This standard was proposed by China National Light Industry Council. This standard is under the jurisdiction of standardization technical committee of jewelry(SAC/TC 256) Drafting organization of this standard: National jewelry quality supervision and inspection center, Guangdong Inspection and Quarantine Technology Center, Shandong Inspection a