8032v2及v1,v3对照学习笔记_v2篇.docxVIP

G.8032/Y03SummaryAPSprotection switching mechanisms(characteristics, architectures)ETH layer Ethernet ring topologiesincorporates Amendment 1 (2010),Appendix X (minimizing segmentation in interconnected rings)multiple faults that could cause segmentation in a network of interconnected rings.uses additional management information and configuration of MEPAppendix XI (end-to-end service resilience)ring protection to interact with the full service protectionITU-T G.8031/Y.13421 ScopeAPSProtection switching mechanisms for ETH layer Ethernet Ring topologiesThe ETH layer ring maps to the physical layer ring structure.2 References[ITU-T G.805][ITU-T G.806]2009版[ITU-T G.808.1][ITU-T G.809][ITU-T G.870][ITU-T G.8010][ITU-T G.8021][ITU-T Y.1731][IEEE 802.1Q]3 Definitions3.1 Terms defined elsewhere与1相比，唯一的区别是G.8021中多定义了一个ETHDi/ETH adaptation function (ETHDi/ETH_A)3.2 Terms defined in this Recommendation3.2.1 Ethernet ring由ring node形成的一个物理上闭合的回路，每个ring node与邻接的ring node相连。注意表述中说的是ethernet ring与ethernet ring node, 并非erp ring或erp ring node,即讨论物理层，Ethernet层面，环的组成与连接，erp ring 与node 映射到该ring物理结构上，实际情况中，如果其中有非支持erp的ring node，应视为透明的link；由此产生的单通状态【如cc单通，或一侧link单通】按erp单通逻辑处理。3.2.2 Ethernet ring nodeA network element which implements at least the following functionalities:ETH_C+ ETH_FF for forwarding APSTwo ring ports, including ETHDi/ETH adaptation functionERP control process controlling the blocking and unblocking of traffic over the ring ports.上述几个function在G.8021中定义，需要进一步学习3.2.3 ERP instance3.2.4 interconnection node表述相当拗口，逻辑还是简单的，简单说互联节点，就是连接多个ring的节点；多个ring中，一个是major ring, 每个互联节点有2个ring port参与， 其它都是sub-ring，每个互联节点有且只有一个ring port参与.Be common to 与…共有互联节点与共享节点不同，共享节点是多个ring共享该节点，各个ring彼此独立，每个ring，有2个ring port参与在没有定义major ring与sub ring的时候抛出interconnection node的概念,又没有图说明，是不妥当滴。3.2.5 major ring物理与逻辑上都闭合的环，共享link属于major ring，每个共享节点有2个ring port参与3.2.6 R-APS virtual channel叙述相当稀烂；ERPS中有2种通道，traffic channel与R-APS channel，在多环的情况下，子环物理与逻辑上未闭合，v1a1中引入virtual channel的概念，让sub ring的R-APS m