数码管万年历ds1302.docVIP

/ＺＰＦ（新） //2012//4/29 #include REGX55.H #includeintrins.h #define uint unsigned int #define uchar unsigned char uchar k,s,aa,Nshi,Nfen;//,miao,nian,yue,ri,zhou; uchar number[8]; uchar dif_flag; //测温度定义 uint temp; float f_temp; //温度值 variable of temperature bit flag; sbit w1=P1^2; sbit w2=P1^3; sbit w3=P1^4; sbit w4=P1^5; sbit DQ=P1^7; sbit dula=P1^0; sbit wela=P1^1; sbit DS1302_CLK = P3^7; //实时时钟时钟线引脚 sbit DS1302_IO = P3^6; //实时时钟数据线引脚 sbit DS1302_RST = P3^5; //实时时钟复位线引脚 sbit ACC0 = ACC^0; sbit ACC7 = ACC^7; sbit key=P1^6; sbit key1=P3^0; sbit key2=P3^1; sbit key3=P3^2; sbit key4=P3^3; sbit key5=P3^4; uchar read[7]; uchar table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f, 0xbf,0x86,0xdb,0xcf,0xe6,0xed,0xfd,0x87,0xff,0xef,0x00 };//共阴数码管 0-9 uchar week_value[2]; //void dis_delay(void); void delay(uint x); void display(unsigned char a,unsigned char b,unsigned char c); void show_time(); //显示程序 void Write1302(unsigned char ucAddr, unsigned char ucDa); void keyscan(); void Display_18b20(uint temp); /***********DS1302时钟部分子程序******************/ typedef struct __SYSTEMTIME__ { unsigned char Second; unsigned char Minute; unsigned char Hour; unsigned char Week; unsigned char Day; unsigned char Month; unsigned char Year; }SYSTEMTIME; //定义的时间类型 SYSTEMTIME CurrentTime; #define AM(X) X #define PM(X) (X+12) // 转成24小时制 #define DS1302_SECOND 0x80 //时钟芯片的寄存器位置,存放时间 #define DS1302_MINUTE 0x82 #define DS1302_HOUR 0x84 #define DS1302_WEEK 0x8A #define DS1302_DAY 0x86 #define DS1302_MONTH 0x88 #define DS1302_YEAR 0x8C void DS1302InputByte(unsigned char d) //实时时钟写入一字节(内部函数)(4) { unsigned char i; ACC = d; for(i=8; i0; i--) { DS1302_IO = ACC0; //相当于汇编中的 RRC DS1302_CLK = 1; DS1302_CLK = 0; ACC = ACC 1; } } unsigned char DS1302OutputByte(void) //实时时钟读取一字节(内部函数)(5) { unsigned char