SIGNAL GROUPING FOR CONDITION MONITORING OF NUCLEAR POWER….pdfVIP

SIGNAL GROUPING FOR CONDITION MONITORING OF NUCLEAR POWER PLANT COMPONENTS Piero Baraldi and Roberto Canesi Energy Department, Politecnico di Milano Viale Ponzio 34/3, Milano, Italy piero.baraldi@polimi.it; roberto.canesi@mail.polimi.it Enrico Zio Energy Department, Politecnico di Milano Viale Ponzio 34/3, Milano, Italy Ecole Centrale Paris Supelec, Paris, France enrico.zio@polimi.it Redouane Seraoui and Roger Chevalier EDF RD – Simulation and information Technologies for Power generation system Department 6, Quai Watier – 78401, Chatou, Cedex, France redouane.seraoui@edf.fr; roger.chevalier@edf.fr ABSTRACT The present work investigates the possibility of building a condition monitoring model by splitting the usually very large number of signals measured by the sensors into subgroups and building a specialized model for each subgroup. Different criteria are considered for selecting the signal groups, such as the location of the measurements (i.e., signals measured in the same area of the plant belong to the same group) and their correlation (i.e., correlated signals are grouped together). A real case study concerning 48 signals selected between those used to monitor the reactor coolant pump of a Pressurized Water Reactor (PWR) is considered in order to verify the monitoring performance of differ