土木工程浦发银行洛阳分行建筑结构设计.doc

浦发银行洛阳分行建筑结构设计 摘 要 本设计名称为浦发银行洛阳分行建筑结构设计。采用钢筋混凝土框架结构体系，结构上分为两部分，主楼层高3.9m，可用于办公。副楼跨度大空间大，可作为银行营业大厅。建筑总高度27.30m，建筑面积为8966.52m2。 本设计包括建筑部分设计和结构部分设计，依据现行法律法规和相关规范进行。建筑设计包括平面设计，空间分割，立体造型等方面，以舒适、经济、美观、环保为设计理念，做到精益求精，各个方面达到高度和谐。结构设计包括梁、板、柱、基础等主要受力构件的截面和配筋设计，此次设计中以最具代表性的一榀横向框架为例，从确定计算单元到荷载统计，从内力计算到内力组合，再从构件设计到抗震验算。计算水平荷载下的框架内力主要采用D值法，计算竖向荷载下的框架受力主要采用分层法。 在整个设计过程中，严格依照国家现行规范和课本进行计算，部分设计细节和计算方法借鉴图书馆资料。 关键词：银行，框架，内力组合，抗震验算，CAD STRUCTURE DESIGN OF SPD BANK LUOYANG BRANCH ABSTRACT This design name for SPD bank luoyang branch building structure design. Using reinforced concrete frame structure system, the structure is divided into two parts, the main building height of 3.9 m, can be used in the office. Deputy building span large space, can be used as the bank business hall. Building a total height of 27.90 m, building area is 8966.52 m2. This design including construction parts design and structure design, according to the current laws and regulations and the relevant specification. Architectural design including graphic design, space division, three-dimensional modeling, etc., with comfortable, economic, beautiful, environmental protection is the design idea, achieve excellence, various aspects to achieve highly harmonious. Structure design including the beam, slab, column, foundation of the cross section of the main stress components and reinforcement design, the design with the most representative one common horizontal framework, for example, from determining the cell to load statistics, from to the combination of internal force, internal force calculation from component design to checked again. Calculated under horizontal load internal force mainly adopts the framework of the D value method, calculation under vertical load stress mainly adopts the framework of hierarchical method. In the entire design process, in strict accordance with the current national standards and textbooks is calculated, some design details and