课程设计设计-基于RF2098芯片扩频接收器电路设计.docVIP

课程设计 题目 基于RF2098芯片扩频接收器电路设计 学院名称 电气工程学院 指导老师 班 级 电子信息工程053班 学 号 学生姓名 二00八年六月 基于RF2098芯片扩频接收器电路设计 摘要 简要介绍RF2908的功能，内部结构`，引脚构造和功能描述，芯片工作原理。RF2908是专门为工作在ISM频段而设计的直接序列扩频(Direct-Sequence Spead-Spectrum)单片接收器，其符合FCC Part l5.247.标准，适合数字无绳电话、保密通信链接、无线局域网、货物跟踪和便携电池供电的移动设备等领域应用。 主要技术特点如下： ·工作频率为902～928 MHz； ·接收灵敏度为-l00 dBm； ·正交解调器； ·工作电源为2.7～3.6 V； ·工作电流为62 mA，待机模式电流为50μA； ·片内可编程86信道PLL频率合成器、基带滤波器和双数字比较器； ·片内可选择中频带宽、带增益控制和信号强度指示器的双中频放大器。 直接序列扩频带增益控制RF2908 briefed the function of the internal structure of `, pin structure and function described, the chip works. RF2908 is designed for work in the ISM band and the design of direct sequence spread spectrum (Direct-Sequence Spead-Spectrum) single-chip receivers, with FCC Part l5.247. Standard for digital cordless phones, secure communication links, wireless LAN, Cargo tracking and portable battery-powered mobile devices, and other areas of application. The main technical characteristics are as follows: ? operating frequency is 902 ~ 928 MHz; ? receive sensitivity for - l00 dBm; ? quadrature demodulator; ? work for the power supply 2.7 ~ 3.6 V; ? work for the current 62 mA, in standby mode current of 50 μ A ; ? 86-chip programmable channel PLL synthesizers, base-band filter and a double-figures for comparison; ?-chip option IF bandwidth, with gain control and signal strength indicator of the double-IF amplifier. Key word: Direct sequence spread spectrum, with gain control. 目 录 1．芯片简介---------------------------------------------------------------------------------------------4 2. 引脚和封装-------------------------------------------------------------------------------------------4 ２.１封装-----------------------------------------------------5 ２.２封装描述--------------------------------------------------5 ２.３引脚功能--------------------------------------------------6 ３ RF2908 内部结构和工作原理------------------------------------------------------------------6 3.1 RF2908内部结构方框图------------------------------------------------------------------