基于QuartusII_多功能数字钟设计.docxVIP

多功能数字钟设计院系：专业：指导教师：班级：学号：姓名时间：2015.3.9-3.18摘要多功能数字钟在我们的日常生活中有着非常广泛的应用。本实验利用QuartusII软件设计一个多功能数字计时器，并下载到SmartSOPC实验系统中。这个数字计时器，可以完成00:00:00到23:59:59的计时功能，并在控制电路的作用下具有保持、清零、快速校时、快速校分、整点报时等功能，这些功能相互独立，却又互相协调配合。在此类基础功能之上还添加了秒表功能。关键词QuartusII软件SmartSOPC实验系统多功能数字钟外文摘要TitleMulti-function digital clock design dissertationAbstractMulti-function digital clock in our daily life has a very wide application. This experiment using software QuartusIIdesign a multi-function digital timer, and download to SmartSOPC experiment system. The digital timer, can complete 00:00:00 to 23:59:59 timing functions, and under the action of control circuit has to keep fast, reset, when the school, the school points, hour, and other functions, and these features are independent of each other, and coordinate with each other. On such a basis function also added stopwatch function.KeywordsQuartusII、SmartSOPC experimental system、Multi-function digital timer。目录1 实验设计要求及说明---------------------------------------------------------------------42 方案论证------------------------------------------------------------------------------------43各子模块设计原理与实现---------------------------------------------------------------53.1脉冲发生器电路----------------------------------------------------------------------53.2 计时电路-------------------------------------------------------------------------------93.3译码显示电路-------------------------------------------------------------------------133.4 清零电路-------------------------------------------------------------------------------153.5 校分电路-------------------------------------------------------------------------------153.6 保持电路-------------------------------------------------------------------------------163.7 报时电路-------------------------------------------------------------------------------173.8 秒表-------------------------------------------------------------------------------------184多位一体-数字计数器总电路图-------------------------------------215系统调试，仿真及编程下载---------------------------------------------