Matlab_Simulink_power_ic经典书籍-Learning Feedback Controller Design of Switching Converters Via MatlabSimulink.pdf

IEEE TRANSACTIONS ON EDUCATION, VOL. 45, NO. 4, NOVEMBER 2002 307 Learning Feedback Controller Design of Switching Converters Via MATLAB/SIMULINK Juing-Huei Su, Member, IEEE, Jiann-Jong Chen, Member, IEEE, and Dong-Shiuh Wu, Member, IEEE Abstract— The application of MATLAB/SIMULINK is devel- oped for simulation and learning feedback controller design of dc–dc switching converters. With the help of its intuitive graphical user interface and some basic circuit theories, the corresponding SIMULINK models of the switching converter circuits can be easily constructed. Students can then use these models to learn and evaluate the closed-loop behavior of the entire system in the MATLAB/SIMULINK environment, after feedback controllers are devised by any classical or modern control theory. The accu- racy of this approach is also verified by comparing the simulation results with the responses obtained from a buck-type dc–dc switching converter circuit and existing experimental results [4]. Fig. 1. Boost-type dc–dc switching converter. Index Terms—dc–dc switching converter, feedback controller, MATLAB/SIMULINK. verge unless some of the default values of parameters are suit- ably changed [10]. Thus, SPICE is not suitable for students I. INTRODUCTION who need to learn quickly what the system dynamics are and to acquire the system viewpoints in linear and even nonlinear HE SWITCHED-