机械外文翻译--虚拟制造在齿轮生产中的应用.docVIP

Application of virtual manufacturing in generation of gears Received: 29 November 2004 / Accepted: 5 May 2005 / Published online: 24 November 2005 Spfinger-Verlag.London Limited 2005 Abstract The manufacturing process of gears is fairly complicated due to the presence of various simultaneous motions of the cutter and the job. In this paper, an attempt is made to generate meaningful design data for spur and helical gears and the corresponding rack form cutter necessary for the manufacturing. Using this information, solid models for the cutter and blank are developed and finally gear-manufac