某涉外项目-(中英双语版)-现场电气设备安装及调试的方案.docxVIP

SPCⅡ现场电气设备安装及调试方案SPCⅡ Electric Equipment Field Installation and Commissioning method statement版本Rev.编制Prepared by审核Reviewed by批准Approved by认可Accepted by目 录1.目的2purpose22.工作范围2work scope23.编制依据2references24.施工准备2Preparation for construction24.1工机具准备2Preparation for machine and tools24.2应配备下列人员：3Preparation for personnel34.3技术准备3Preparation for technical34.4材料准备3Preparation for materials34.5人员准备3Preparation for construction person35.电气设备安装要求4installation requirment46.金属构件制作安装及控制箱、盒安装5metal component fabrication and installation, control box installation56.1操作柱的制作安装5operation post fabrication57.电动机检查6electromotor inspection67.1作业条件6work condition67.2作业方法6work method67.3电动机启动调试7start commissioning78.照明安装。12Illumination installation128.1导线的敷设12lead pulling128.2照明灯具作业方法和步骤12lighting appliance working method and steps129.交工验收要求12handover acceptance requirements1210.危险点分析13hazardous analysis13目的purpose 本程序描述拜耳聚碳酸酯SPCII项目电气设备安装有关规定。为保证电气设备的正确安装及电动机能安全投入运行，促进施工管理和技术水平的提高。 This procedure describes the related provision on electrical equipment installation of Bayer Polymers SPCII project so as to ensure the correct installation, operation and promote the administration and technology skills. 工作范围work scope适用于拜耳聚碳酸酯SPCII项目，主要区域为B204、B244、B209；其中电机就地控制按钮共计51个；就地控制盘2个；电机就地控制转换开关54个；电动机检查及启动调试共计68台；照明安装 28盏。It is applied to the main area B204、B244、B209 of Bayer Polymers SPCII project, among which there are 51 electrical grounding control button; 2 grounding control panel;54electrical grounding control switch; 68 motor inspection and commissioning and 28 lighting installation. 编制依据references·GBJ 50254-96 电气安装工程低压电器施工及验收规范； LV electrical apparatus construction and acceptance code for electrical installation engineering GBJ 50254-96·GBJ 50255-96 电气安装工程电力变流设备施工及验收规范；Electric power variable current equipment construction and acceptance code for electrical installation engineering GBJ 50255-96·GBJ 50256-96 电气安装工程起重机电气装置施工及验收规范；Lifting electric device construction and acceptance code