基于MCGS组态软件技术的水位控制远程监控系统的应用.docVIP

无锡职业技术学院 毕业实践任务书 课题名称基于MCGS组态软件技术的水位控制远程监控系统的应用研究 指导教师 苏卫峰 职 称 讲师 专业名称生产过程自动化班 级 20732 学生姓名 尹梁 学 号 2040073234 课题需要完成的任务： 通过MCGS组态软件、变频器、传感器配电装置以及水泵 确定控制方案，选择MCGS组态软件及PLC型号，定义输入/输出，画出 流程图和梯形图。 进行软件编程、完成控制梯形图并完成调试。 4、熟练掌握MCGS组态软件的使用方法和调试步骤。 计划课题： 2010.3.1 ～20 了解工艺过程和控制要求 2010.3.11 ～20 熟悉元器件及选择和硬件电路设计 2010.3.21～20 程序流程图绘制 2010.4.1 ～20 程序模拟调试与修改 2010.4.11 ～20 整理图纸及各类资料，完成毕业设计论文，准备答辩 计划答辩时间：2010年4月20日~5月5日 自动控制技术系 （部、分院） 2010 年 5 月 4 日PLCs --Past, Present and Future Everyone knows theres only one constant in the technology world, and thats change. This is especially evident in the evolution of Programmable Logic Controllers (PLC) and their varied applications. From their introduction more than 30 years ago, PLCs have become the cornerstone of hundreds of thousands of control systems in a wide range of industries. At heart, the PLC is an industrialized computer programmed with highly specialized languages, and it continues to benefit from technological advances in the computer and information technology worlds. The most prominent of which is miniaturization and communications. The Shrinking PLC When the PLC was first introduced, its size was a major improvement - relative to the hundreds of hard-wired relays and timers it replaced. A typical unit housing a CPU and I/O was roughly the size of a 19 television set. Through the 1980s and early 1990s, modular PLCs continued to shrink in footprint while increasing in capabilities and performance (see Diagram 1 for typical modular PLC configuration). In recent years, smaller PLCs have been introduced in the nano and micro classes that offer features previously found only in larger PLCs. This has made specifying a larger PLC just for additional features or performance, and not increased I/O count, unnecessary, as even those in the nano class are capable of Ethernet communication, motion control, on-board PID with autotune, remote connect