KISSsoft-培训资料.pptVIP

4th June 2014 - Confidential * 6.3 交错斜齿轮参数 KISSsoft软件齿轮案例 4th June 2014 - Confidential * Thank you Any questions？ Actual problem please contact DGRD for KISSsoft’s consultancy KISSsoft Basic Training - Internal * * * * * * * * * * 4th June 2014 - Confidential * 齿轮的粗修形参数（Modifications） 注意：如果选用R角过小，会导致线走丝无法越过尖角；R角过大，会导致重合度变小. If the required gear shape has no tip rounding, or too small a tip rounding, then, the mold cavity has a concave corner that can not be cut with a wire: Material side of cavity of mold Wire Spark gap KISSsoft软件齿轮基本模块介绍 4th June 2014 - Confidential * 齿轮的精修形参数（Modifi