HPUX现场实用技能培训.pptVIP

Enterprise Virtual Array Family Service and Support Advanced Diagnostics and Troubleshooting Rev. 9.11 – HP Restricted Instructor notes Tell students that the lab contains information on how to save Perfmon output to a file. Enterprise Virtual Array Family Service and Support Advanced Diagnostics and Troubleshooting Rev. 9.11 – HP Restricted Instructor notes Tell students that the lab contains exercises on using the command line. EVAPerf output in Windows Perfmon is a subset of the counters recorded off the EVA. To fully analyze an array, you should use the command line version of EVAPerf to read many of the important counters like Mirrored MB for each VDISK and Virtual Disk Group Statistics. (ms) = milliseconds Requests/s = IOPS This is an overview of the counters in EVAPerf. VDISK and VDISK statistics shows the overall latencies for the IO operations from the time the command is issued, through the controllers, physical disks and till the data is returned to the requesting host. * This shows the output of EVAPerf with friendly names. Friendly names are stored in the fnames.conf file located in the installation directory of EVAPerf. XP24000 Hardware architecture Version 2.0– HP Restricted XP24000 architecture The XP24000 architecture looks similar to the previous generations of arrays, with a few enhancements: 28 CHAs (14 pairs) 16 DKAs (8 pairs) Increased: Processor speed (800Mhz) Back-end Fibre speed (4Gb/s) Shared Memory path speed (38.4GB/s) XP24000 Hardware architecture Version 2.0– HP Restricted XP24000 operator panel The operator panel consists of a combination of status LEDs and switches. In addition there are a set of jumpers on the rear of the OCP for configuring de-stage and power-on modes. Note: The Emergency LED on the front operator panel is lit only if the emergency power-off (EPO) switch is pulled and activated. XP24000 SVP Menu and Remote Web Console Rev. 7.31 – HP Confidential XP24000 SVP location When the SVP is duplicated, the backup SVP