国际海事组织通过强制性压载舱涂层标准 pr34.pdfVIP

No.34 No. IACS Procedural Requirement on Application of No. 34 the IMO Performance Standard for Protective 34 (Dec (cont’d) Coatings (PSPC), Resolution MSC.215(82), 2006) under IACS Common Structural Rules for Bulk Carriers and Oil Tankers 1. IACS Procedure for Coating System Approval Type Approval Certificate showing compliance with the PSPC section 5 shall be issued if the results of either method A+D, or B+D, or C+D are found satisfactory by the Society. Method A: Laboratory Test 1.1 Coating pre-qualification test shall be carried out by the test laboratory which is recognized by the Society and meets the requirements set out in IACS UR Z17 paragraphs 4, 5, 6 and 7 (except for 4.6 5.3) as below. 1.2 Results from satisfactory pre-qualification tests (PSPC table 1, paragraph 1.3 of the PSPC) of the coating system shall be documented and submitted to the Society. Method B: 5 years field exposure 1.3 Coating manufacturer’s records are to be examined to confirm coating system has 5 years field exposure. 1.4 A joint (coating manufacturer/Society) survey of all ballast tanks of a selected vessel is to be carried out for the purpose of verification of compliance with the requirements of sections 1.3 and 1.7. The coating manufacturer’s representative is to be qualified as defined in 2.2. 1.5 The selected vessel is to have ballast tanks in regular use, of which: • At least one tank approx 2000 m3 • At least one tank shall be adjacent to heated tank and • At lea