风道模流分析报告文档.pptVIP

* System Pressure System Injection Pressure XY Plot (Taken at machine Nozzle) 最大注射压力：48.02MPa Max. injection pressure: 48.02MPa * Clamp Force Clamp Force XY Plot 最大锁模力：1075Ton Max. Clamp force: 1075Ton * Volumetric shrinkage at ejection Volumetric shrinkage at ejection 由图可知，产品表面的体积收缩率。 * Temperature part Temperature part picture Cavity Core * Circuit coolant temperature Circuit coolant temperature COMMENT: From the picture, it shows the difference the coolant inlet temperature and coolant out temperature is small than 3c. The cooling system is good. cavity