[工学]基于PLC的四层电梯控制和组态王模拟钻头控制.doc

电气工程学院 课 程 设 计 说 明 书 电气控制与PLC 设计题目： 钻孔动力头系统 系 别： 年级专业： 学 号： 学生姓名： 指导教师： 教师职称： 燕山大学课程设计（论文）任务书 院（系）：电气工程学院 基层教学单位： 仪器科学与工程系 学 号 学生姓名 专业（班级） 设计 题目 基于运算放大器的电流环设计 设 计 技 术 参 数 采用运算放大器及达林顿管，将输入的0-2.5V直流电压信号转换为4-20mA的电流信号。 设 计 要 求 1：完成题目的理论设计模型； 2：给出系统原理图、关键器件的参数及设计依据； 3：完成电路的multisim仿真； 工 作 量 1：完成一份设计说明书（其中包括理论设计的相关参数以及仿真结果）； 2：提交一份电路原理图； 工 作 计 划 周一上午到周二上午，教室内做理论设计； 周二下午到周五上午，自己有计算机的同学在教室内做multisim仿真，没有计算机的同学到实验室进行电路仿真； 周五下午，教室内整理设计材料、准备撰写设计说明书 参 考 资 料 1:基于运算放大器和模拟集成电路的电路设计； 2：模拟电子技术； 3：电路理论 4：数字电子技术； 指导教师签字 温江涛 基层教学单位主任签字 目　录 摘 要　······················································ 第一章 PLC相关知识　·········································· 1.1 PLC基本概念　　············································ 1.2 PLC基本结构　　············································ 1.３ 变频器相关知识　　·········································· 1.3.1变频器的工作原理　······································· 1.3.2 变频器的控制方式　····································· 第二章 四层电梯控制设计　······································ 2.１ 四层电梯的动作要求　······································· 2.2 与设计相关的知识　·········································· 2.3 电梯控制具体设计　　　······································· 2.3.1 输入输出分配表　······································· 2.3.2 主体流程　············································· 2.3.2 电梯上下行判断流程　　································· 2.4 总梯形图　　··············································· 第三章 钻孔动力头系统设计　　·································· 3.1 动力钻头控制设计要求　····································· 3.2 组态王软件相关知识　　····································· 3.2.1 组态王　············································· 3.2.2组态王实现步骤　······································ 3.3 用组态王实现钻孔动力钻头的控制　····························· 3.3.1 变量定义（数据词典）　································ 3.3.2 组态王运行画面　····································· 3.4 钻孔动力头系统控制命令程序　······························· 总 结　　···················································· 参考文献　···················································