毕业设计（论文）-基于单片机的温湿度监控系统设计精选.docxVIP

摘要在日常生活中，温度和湿度常伴随在我们身旁。温度和湿度的测量范围是非常广泛的，对温度和湿度的测量系统的研究，至今也还具有着深远的意义，本次课题主要是针对国内和国外对温湿度测量系统来进行研究与分析发展的情况等，主要是分析了现在温度湿度测量系统中会存在的一些问题，以及在我们的日常生活中的重要性。所以设计了一种简单方便的，基于单片机的温湿度测量系统，这次设计要求简单、适用、稳定等。还有一个特点就是能够自动的进行检测。这次设计主要分为两个部分，一部分为硬件电路部分，一部分为软件设计部分。通过软件和硬件结合的结合，来检测温湿度，采集到的信号给单片机，通过单片机来处理采集到的信号，通过液晶屏显示，如果温度和湿度过高或过低，则会自动报警电路。 温室度以单片机设计为核心，采用的传感器为DHT11,这种传感器有着智能化，使用方便、实时性强等特点。温湿度控制系统主要有以下几个电路，包括LCD显示、键盘电路、报警等几个部分组成。 实现一种智能、快捷、方便的温湿度测量系统。整个系统由温湿度检测电路、LCD显示电路、键盘电路、报警电路和单片机等组成。该系统结构简单紧凑，功耗低，抗干扰能力强，总体来说性能较好，符合智能仪表小型化的趋势，为今后高性能温湿度测量仪的研制和商业化打下了良好的基础。数字化温湿度传感器，以及实现温湿度信息的在线检测已成为温湿度检测技术的一种发展趋势。关键词：单片机温湿度 液晶AbstractThe measurement of temperature and humidity range is very wide, on the temperature and humidity measurement system research is also of great significance, this topic at home and abroad of temperature and humidity measurement system research and development, analyzes the main problems existing in the current temperature and humidity measurement system, design a based on single-chip microcomputer temperature and humidity measurement system for some special temperature and humidity requirements of the occasion to achieve long-term, stable, real-time and automatic monitoring. This design mainly consists of two parts, circuit of hardware and software system through the temperature and humidity detection circuit, the collected signal to the microcontroller, through the single-chip microcomputer to deal with signals collected and displayed through the LCD, if temperature and humidity is too high or too low, the alarm will automatically alarm circuit.STC89C52 microcontroller as the core, the use of DHT11 integrated temperature and humidity sensors to achieve a smart, fast and convenient temperature and humidity measurement system. The whole system is composed of temperature and humidity detection circuit, LCD display circuit, keyboard circuit, alarm circuit and single chip microcomputer. Design of the system structure is simple and compact, low power consumption, strong anti-i