[IT认证]网络工程师-6-管理网络设备.pptVIP

  1. 1、本文档共40页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  5. 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  6. 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  7. 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  8. 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
[IT认证]网络工程师-6-管理网络设备

Chapter 6 管理网络环境 CDP协议 (Cisco Discovery Protocol ) 通过 CDP 发现邻居 使用 CDP show cdp neighbor Command show cdp entry Command 其它CDP Commands 使用Telnet命令连接远程设备 查看Telnet连接 挂起 Telnet 会话 关闭 Telnet会话 ping and trace 命令 Cisco Router 启动过程 加电自检 (POST) 导入并运行 bootstrap 代码 寻找 IOS 加载 IOS 寻找配置文件configuration 加载配置文件configuration 运行 Router 内部组件 ROM Functions 查找 IOS Router Start-up Flow Chart 查看当前配置寄存器的值 配置寄存器的值 配置寄存器的值 Configuration register bits 3, 2, 1, and 0 set boot option 配置寄存器的值 Configuration register bits 3, 2, 1, and 0 set boot option 配置寄存器的值 Configuration register bits 3, 2, 1, and 0 set boot option Check configuration register value with show version Loading the IOS from Flash show flash Command Loading the Configuration show running and show startup Commands 修改配置 修改配置 修改配置 修改配置 copy run tftp and copy tftp run Commands Cisco IOS File Systems and Devices 管理 IOS Images 备份IOS的准备工作 备份IOS的准备工作 备份IOS的准备工作 备份IOS的准备工作 验证Flash容量及文件名 备份IOS 升级IOS Slide 1 of 1 Purpose: Emphasize: In a later slide, there is a very detailed flowchart of the router startup process. Slide 1 of 1 Purpose: Emphasize: Note: RAM - Packet buffers, running configurations, running IOS ROM - POST, Rom Monitor, Baby IOS (Rxboot) NVRAM - Backup configurations, Config register Flash - IOS Flash memory is non-volatile. It behaves like a file system. It is more expensive than NVRAM. It is readable and writeable. The 2500 routers run from flash. If it is running IOS from flash, then the flash is in the readable state. Use the boot system command to boot an IOS from a tftp server so the 2500 can run from RAM if you need to write or erase flash online. Slide 1 of 1 Purpose: Emphasize: Note: Mini IOS is the Rxboot mode. One use of the Rom Monitor is for password recovery. From Rom Monitor, you can set the config register to 0x2142 so the NVRAM will be ignored during startup. Slide 1 of 1 Purpose: Emphasize: Note: There is a detail flowchart of the router startup process on the next slide. Slide 1 of 1

文档评论(0)

ipbohn97 + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档