某大学综合公寓楼毕业设计计算书论文报告.docVIP

摘 要 本工程为郑州市某大学综合公寓楼，建设地点位于河南省郑州市，总建筑面积约。结构形式采用钢筋混凝土框架结构，主体为5层，抗震设防烈度为7度，Ⅱ类场地土，基本风压，基本雪压。 本设计主要对方案中横向框架的第⑨轴进行结构设计。在确定了框架布局之后，进行了重力荷载代表值的计算，求出自震周期。接着按底部剪力法计算出水平地震力，之后求出水平荷载作用下结构内力。接着计算竖向荷载作用下的结构内力，包括弯矩、剪力以及轴力。然后进行了内力组合，找出最不利组合进行截面配筋计算，并绘制结构施工图。后边还对楼梯进行了设计，对梯段板、平台板及平台梁进行了配筋计算并绘图。最后进行了基础设计，对其进行了配筋及绘图。 在整个结构设计过程中，严格遵循了相关专业的规范要求。参考了其它毕业设计资料和国家标准，对设计的各个环节进行了综合详细的考虑。总之，安全、适用、经济是本设计的基本原则。 关键词： 框架结构；结构设计；内力组合；配筋计算 Building Structure Design of Zhengzhou university apartment blocks Absrtact: This project is a comprehensive apartment building in Zhengzhou University, the construction site is located in Zhengzhou, Henan Province, with a total construction area of about 5148 square meters. Structural form of reinforced concrete frame structure, the main body for the 5 storey, seismic fortification intensity of 7 degrees,Class II soil, the basic wind pressure is 0.55 and the basic wind pressure is 0.25. The main design of the scheme in Section 9 transverse frame shaft structure design. After determining the frame layout, the calculation of the representative value of the gravity load is carried out. Then calculate the horizontal seismic force by the bottom shear method, and then calculate the internal force of the structure under the horizontal load. Then calculate the vertical load of the structure of the internal forces, including bending moment, shear force and axial force. Then the internal force combination, to find out the most unfavorable combination of cross section reinforcement calculation, and draw the structure of the construction plan. Then the stairs were designed, and the ladder section board, platform board and the platform beam were calculated and drawn. At last, the foundation design is carried out, and the reinforcement and drawing are carried out. In the whole structure design process, strictly follow the requirements of the relevant professional norms. Reference to other graduation design information and national standards, the design of the various aspec