点滴系统控制设计-应用文.docVIP

摘 要 ，。。 ，，，。，对输液速度进行控制。，控制一个和主从机之间的数据传输。，从站进行报警使用发光二极管和蜂鸣器，并通过串行口传送至主站报警信号，主站通过监控软件和蜂鸣器实现声光报警。 8051单片机为核心，组成有线监控系统使用两块系统板，键盘控制速度的显示和液体点滴速度的主机实现对从机的控制及液体点滴；从机通过外围电路检测储液瓶中液面高度和液体点滴速度；通过从机实现对步进电机控制以实现对储液瓶高低的控制，来实现控制液体点滴速度。 关键词： 点滴速度；光电传感器；步进电机；单片机 ABSTRACTWith the development of science and technology, advanced technology has been widely used in various fields of life. With the development of technology, the development of medical devices is also very rapid. Like traditional Chinese medicine and the pulse has been rarely used now, the hospital most of the use of advanced technology, such as the sick most of the use of injections or intravenous drip infusion on the human body, but the infusion technique is not so advanced, people need the care of drip system, sometimes to a personal monitoring for many people, sometimes not even time to drop monitoring system, which leads to the occurrence of accidents, so the design idea is to design a timely monitoring system and a device without dropping speed of liquid is very necessary. The design of the system is to drop speed detection, this system can be very good for every bit of the detection and control, is a good solution to the frequent infusion process of the accident, the dropping speed is displayed on the LCD screen display. And the design of the systems speed control can be set by the button, the infusion speed control is completely automatic. Of course, this improved communication system can also be used for multiple systems, can through wireless communication, that is to say the data transmission between a master and slave control by a host to control. Once detected when there is no liquid drip or abnormal when the alarm from the station is to use a light emitting diode and a buzzer to achieve, and transmit the alarm signal through the serial transmission to the master station, through sound and light alarm monitoring software and buzzer. Drip controller MCU control system of this design, using 8051 single-chip mi