干摩擦条件下钛合金表面TiCuN镀层的摩擦磨损性能.docVIP

Friction and Wear Behaviors of Ti/Cu/N Coatings on Titanium Alloy Surface by DC Magnetron Sputtering LI Junxia, PANG Xiaoxu, FAN Ailan*, ZHANG Huiqiao( ( College of Mechanical Engineering, Taiyuan University of Technology, TaiYuan 030024, China） Abstract: Ti/Cu/N coatings with different Cu contents were deposited on titanium alloy surface by DC Magnetron Sputtering Technique. XPS and FESEM were employed to characterize the composition and structure of the coating on the Ti6Al4V substrates. In addition, The adhesion force, friction and wear properties of the Ti/Cu/N coatings were investigated. The experimental results showed that the large particles of the coatings were growing more and the surface roughness increased with the increase of copper content in the coatings; The coatings showed a strong adhesion force; The friction coefficient of the coating of the samples was less than the substrate, reached 0.19 at least. The wear resistance of the coatings could be improved by optimizing and controlling the relative content of elements Ti, Cu, N elements in the Titanium alloy surface, especially the 10.98At% contents of the copper. The sample C2 kept the best wear resistance. Keywords：itanium alloy substrate；DCMS；oating；riction；ear 1 Introduction Titanium and Titanium alloy are widely used in many industrial fields due to their excellent corrosion resistance and mechanical properties[1]. However, the poor tribological behavior of the titanium and titanium alloy limits their wide application[2]. So the research about the modifying properties of the surface of titanium is still conducted[3].Nowadays,a series of different surface modification techniques,such as physical and chemical vapor deposition(PVD/CVD)[4], thermal oxidation[5], ion implantation[6], plasma spraying[7] and arc reactive ion plating[8]have been developed to improve the tribological properties of the coatings. In addition, a number of titanium alloy-based coatings are deposited by applying differe