敲击式电子门铃精选.docVIP

毕业设计（论文） 设计（论文）题目： 敲击式电子门铃 所 在 系 ： 电子工程系 专 业 名 称 ： 应用电子技术 学 生 姓 名： 学 号： 指 导 教 师： 2009年3月15日 摘要 随着科学技术的进步，电子行业的迅速发展，大大提高人们的生活水平。 电子行业的迅猛发展，推动了的不断产生和更新，便是在这一条件下产生的所需的按钮有客人来访时，只要用手轻轻敲击房门，室内的电子门铃就会发出清脆的“叮咚”声。我们就能够“叮咚来了很多的和本设计中，我们采用了控制多模块的方式。硬件部分由拾音放大、单稳态触发、脉冲计数乐发生和音频放大等电路组成模块五大部分组成。具体实施办法是：以为核心，通过指令，再由控制模块、模块和模块，输出“叮咚”响应结果。【关键字】：拾音放大、单稳态触发、脉冲计数、乐发生、音频放大电路Abstract With the scientific and technological progress, the rapid development of the electronics industry, greatly improve peoples standard of living. The rapid development of the electronics industry, and promote the electronic products continue to produce and update, electronic doorbell at this condition is generated. Percussion electronic doorbell does not use the general requirements for electronic doorbell button, when a visitor, as long as the hands gently tapping the door, the interior will be issued electronic doorbell clear the ding dong sound. We will be able to hear at after the ding dong sound, put down the things go for the guests to open the door. The emergence of electronic doorbell peoples lives give rise to a lot of easy and convenient. This paper mainly introduces the percussion principle electronic doorbell and characteristics.This design, we have adopted a monostable multivibrator to control the way many modules. Hardware in part by the pickup enlarge monostable trigger, pulse counting, music happen and audio amplification circuit composed of five major components module. Specific implementation methods are: A monostable multivibrator as the core, through the pulse command, and then by the monostable multivibrator pulse control module, Lok happened modules and audio amplification module, the output ding dong in response to the results. The doorbell moves reliable, not because of natural ground vibrations caused by vibration of living objects and actions have no place