ABB DCS 系统 培训课程 系列讲座 Analyze.docVIP

Analyze General Information Description This chapter contains information about how to get more information concerning some diagnostics tools. Objectives On completion of this chapter you will be aware of possibilities in the system to get more information concerning: Startlog/System Log Control Modules in on-line mode (“Show Control Modules in Run”) Application information System diagnostics Reference Documentation Use the online help: Contents tab, Maintenance Lesson 1 – Analyze Description This lesson contains information about how to get more information concerning some diagnostics tools. Objectives On completion of this lesson you will be aware of possibilities in the system to get more information concerning: Startlog and System Log Control Modules in on-line mode (“Show Control Modules in Run”) Application information System diagnostics Startlog All of the important events occurring during a transfer between offline mode and online mode is recorded in a text file, named startlog.dat. To display the contents of the file, select (Tools Maintenance Analysis Start log) from the menu of the Project explorer. Normally, the recording starts when the online entry is activated. On auto start, the recording starts on the first displayed dialog box. A new text file is created for every transfer between offline mode and online mode. If an auto start fails, the reason for the failure is presented in this Start log file. System Log The system log contains all product printouts to inform you of warnings or errors. For example, if a task is aborted or if an overload in the controller occurs. This is written to the system log as information, a warning or an error. If you have unusual problems with a controller, the system log can be a very important information resource. Select (ToolsMaintenanceRemote systemShow System Log) from the menu of the Project Explorer to fetch the system log from the controller. When the last byte of the System log is fetched from the remote