1020低碳钢放电被覆铝皮膜之表面性质研究.pdfVIP

1020 低碳鋼放電被覆鋁皮膜之表面性質研究 防蝕工程　第二十二卷第二期　第83 ～ 88 頁　2008 年6 月 Journal of Chinese Corrosion Engineering, Vol. 22, No. 2, pp. 83 ~ 88 (2008) 1020 劉有量* 、吳貞欽、徐弘明、張家華 Study on Surface Properties of 1020 Low Carbon Steel Coated by Electro-Spark Deposited Aluminum Y. L. Liu*, J. C. Wu, H. M. Hsu, C. H. Chang 放電被覆法是一種新穎的表面處理技術，可用於修補金屬表面孔洞及缺陷，非常適合 於現場局部性維修工作。本文旨在探討放電被覆鋁皮膜之附著力、表面結構與熔射鋁皮膜 之差異。由實驗結果顯示，放電被覆鋁皮膜具有低氧化及低孔隙率之特性。經皮膜之附著 力測試比較，放電被覆鋁皮膜亦具有較佳之附著力。因此，採用放電被覆鋁將有較佳之防 蝕效果。 關鍵詞：放電被覆；表面處理；熔射。 ABSTRACT Electro-Spark Deposition is a newly developed technology of surface treatment of metals. It is very suitable for repairing the porosity or defects of metal surface in local conditions. In this study, we focused on the bonding strength of deposits and their surface morphology and microstructure of ESD aluminum. The difference of the surface properties between ESD and thermal sprayed aluminum was also discussed. The experimental results showed that the ESD aluminum layer had better bonding strength, lower porosity and oxidation phenomenon. Moreover, the better anti-corrosion property of ESD aluminum layer can be expected. keywords: Electro-spark deposition; Surface treatment; Thermal sprayed coating. ˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍˍ 中山科學研究院化學研究所 Chemical Systems Research Division, Chung-Shan Institute of Science Technology * 連絡作者：s912814@.tw -83- 防蝕工程　第二十二卷第二期　2008 年6 月 1. 2.