房屋抗台风强度的美国标准.pdfVIP

American National Standard for Evaluating the Simulated Wind Uplift Resistance of Roof Assemblies Using Static Positive and/or Negative Differential Pressures ANSI/FM Approvals 4474 March 2004 ©2004 FM Approvals LLC. All rights reserved. Foreword NOTE: This foreword is introductory only and is not part of American National Standard FM 4474. This standard is intended to verify that the product as described will meet minimum specific stated conditions of performance, safety and quality, useful in determining the potential suitability for end-use conditions of these products. It describes minimum performance requirements for materials that are intended for use in roof assemblies by evaluating the ability of the materials and, in turn, the system components to withstand simulated wind uplift resistance. This American National Standard has been developed according to the essential requirements of due process for standards development of the American National Standards Institute (ANSI). FM Approvals is an ANSI- accredited standards developer (ASD). Approval of an American National Standard requires verification by ANSI that the principles of openness and due process have been followed and that a consensus of those directly and materially affected by the standard has been achieved. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached. The American National Standards Institute does not develop standards nor will it in any circumstances give an interpretation of any American National Standard. Requests for interpretations of this test standa