低氧高钛铁应用及研究进展.pdfVIP

Metallurgical Engineering 冶金工程, 2015, 2(3), 107-121 Published Online September 2015 in Hans. /journal/meng /10.12677/meng.2015.23017 Research Advance and Application of High Titanniumferrous with Low Oxygen Zhihe Dou, Shigang Fan, Chu Cheng, Ting’an Zhang, Guanyong Shi Key Laboratory of Ecological Metallurgy of Multi-Metal Intergrown Ores of Ministry of Education, Northeastern University, Shenyang Liaoning Email: douzh@ th th th Received: Jun. 13 , 2015; accepted: Jun. 30 , 2015; published: Jul. 9 , 2015 Copyright © 2015 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract With the increasing needs of special stainless steel, pipeline steel, automotive steel, and marine steel in recent years, the high titanium ferroalloy is becoming a great demand in the market, and the requirement of oxygen content in the high titanium ferroalloy is demanding. In addition, with the popularity of feeding refining technology, the need of high titanium ferroalloy core with low oxygen residual is becoming greater. China is developing a method of preparing ultra-fine high ti- tanium iron powder with low oxygen residual by fluoride salt aluminothermic reduction. The content of oxygen, aluminum, and silica is less than 2.0%, 4.0%, and 0.5%, respectively, and the content of impurities such as S, V, Mn, C is almost zero. And a ten-thousand-ton production line will be under construction. At the same time China is also developing a new technology of prepar- ing high titanium ferroalloy with low oxygen residual by step-by-step reduction, of which the oxy- gen content in the hi