多路电子抢答器的设计【毕业设计论文】.docVIP

浙 江 * * 学 院 毕业设计（论文） 题目：多路电子抢答器的设计 姓　　 名 系 别、 专 业 导 师 姓 名、职 称 完 成 时 间 Abstract Digital Responder from the main circuit and expansion circuit. Priority encoder circuit, latch, decoder circuit team input signal on the display output; with host switching control circuit and main circuit start alarm circuits. In the decoding circuit and timing circuit by the second pulse generator output signal on the display shows the circuit timing functions that form the extension. After installation and commissioning work formed digital answering device. Responder is installed around the hole, can be easily installed in the operating table, add the appropriate answer in the button access terminal, if the external bell or a light that access relay terminals, answering devices power supply 9-15 V DC input. Responder power, the bells ring device, the three digital display 0, press the reset button to enter the normal working state, began to set the answer in countdown time, as long as the button pressing the decimal encoding of time 10, respectively, and a bit set set, set the time on a real-time digital control is displayed, set the time range: 0-99 seconds, set the time, you can press the Start button, said the answer in the beginning, the sound of bells given 0.1 seconds to remind players began to answer in the same time, start the countdown timer. If the answer in the answer in time, it was, then the digital control immediately display answering player number, while electric rings, one second and relay 1 second, that some people answer in, the answer time, only the reset button and effective, the other keys are invalid, this Press the reset button only when the host only after the next round. If no answer in the answer in time, then again count down to 0, the third group total digital display 0, indicating no answer in 2 seconds, buzzer and relay to 2 seconds, then reset button in addition to, other buttons are invalid, to enter the ans