传热双语资料HT-ch1.pptVIP

WHEN a heat-transfer surface at temperature T1 completely enclosed by a much larger surface maintained at T2 .the equation becomes 1-5 dimensions and units Definitions Dimension: A dimension is a physical variable used to specify the behavior or nature of a particular system. Units: When we need to determine the dimensions of something, we give the units with which we choose to measure the dimension. The SI quantities in heat transfer are showed in table 1-4 on the right side The SI system also specifies standard multiples to be used to conserve space when numerical values are expressed. they are summarized in Table 1-3 1-6 summary Heat transfer includes 3 different kind modes: conduction, convection and radiation Heat transfer Conduction Mechanisms: Fourier’s law Convection Mechanisms: Fourier’s law; Fluid mechanics Radiation Mechanisms: Propagation of Electromagnetic energy The mechanisms are showed as follows: example As shown in figure 1-9. in this case the heat conducted through the plate is removed from the plate surface by a combination of convection and radiation. An energy balance would give That’s all Thank you!! * Bilingual Program Heat Transfer Instructor: Dr. Tan Sichao College of Nuclear Science and Technology, Harbin Engineering University Heat Transfer Instructor CV College of Nuclear Science and Technology, Harbin Engineering University Si-chao Tan, Prof. of CNST, HEU B.S. CPNE, HEU (2001) M.S. CPNE, HEU (2003) Ph.D. CNST, HEU (2006) Post-doctoral at CNST, XJTU (2006-2009) Visiting scholar at Dept. of NE, TAMU, USA (2009-2010) Associate Professor at CNST, HEU (2007-2009) Professor at CNST, HEU (2009-Present) Mobile: Office： 3A205, 1#527 E-mail: tansichao@hrbeu.edu.cn Heat Transfer Objectives Why you choose this course What do you expect from this course How we organize the course College of Nuclear Science and Technology, Harbin Engineering University Heat Transfer 学习要求 质疑——发现问题——态度的转变 推理——分析问题——思