毕业论文（设计）住宅小区12号楼照明供配电系统设计_精品.doc

毕业论文（设计）住宅小区12号楼照明供配电系统设计 load level of the project is designed as the 3rd hierarchy and input voltage level is presented by 380220V and household load is designed as 6kW The design contents include illumination calculation load calculation and the selection of circuits and cross sections and the current setting of low voltage breaker and equipments making and installation and equiotential bonding and as well as lighting protection and grounding system and so on Firstly unit capacity method is applied to implement illumination calculation and the needed coefficient method is applied to implement the load calculation and the cross sections of the circuits are selected according to long-term allowable temperature rise and voltage loss and the low-voltage breakers are selected according to the imum working current and line protection conditions Socket and lighting circuits are arranged in different supply loop and leakage protection breaker is applied in socket loop Lighting protection with the 3rd level is designed in accordance with specifications and grounding system adopts TN-S system and general equipotential connection together local equipotential connection is designed The overall design accords with the relevant technical regulation requirements Equipments selection is reasonable so as to better meet the applicable functions and be able to better guide the construction Key WordsResidentialIlluminationLoad calculationSupply and distribution systemThunder protection目 录 摘　　要 I Abstract II 目 录 III 1 绪论 1 11 工程背景 1 12 设计范围 1 13 设计依据 1 14 设计目标 1 15 本文的主要工作 2 2 照明平面图 3 21 单元照明平面图设计 3 com 照度确定 3 com 光源和灯具的选择 3 com 单位容量法计算各房间负荷 4 com 开关的选择 6 22 单元插座平面图设计 6 com 插座的配置 6 com 插座的选择 7 3 照明配电系统图 9 31 照明负荷计算 9 com 需用系数法 9 com 负荷计算 10 32 导线电缆及低压电器的设计 12 com 导线电缆及低压电器设计原则 12 com 导线电缆及低压电器选择 13 4 箱体制作及安装 17 41 总配电箱的制作及安装 17 42 分配电箱的制作及安装 17 43 分户箱的制作及安装 18 5 防雷接地系统与等电位联结安装 19 51 防雷接地系统设计 19 52 等电位联结系统设计 19 com 总等电位联接系统设计 19 com 卫生间局部等电位联接系统设计 19 结 论 20 致 谢 21 参考文献 22