毕业论文：基于51单片机的LED点阵显示屏系统的设计与实现98_精品.doc

毕业论文：基于51单片机的LED点阵显示屏系统的设计与实现98 基于 51 单片机的 LED 点阵显示屏系统的设计与实现 摘要：本文介绍了一款以单片机 AT89S51 为控制器的 LED 点阵显示屏系统的设计。 该系统可实现中英文字符的显示和动态特效显示。并且可以通过级连的方式来扩大 显示屏幕的尺寸以达到增加显示内容的目的。系统采用 PC 机作为上位机，上位机 向单片机发送控制命令和上位机所存储的显示代码，AT89S51 单片机接收并处理PC 机的控制命令以及显示代码，由显示驱动模块驱动一个 16×16 分辨率的 LED 点阵 显示屏的扫描显示。PC 机与单片机之间的通信采用 RS―232C 通信标准来实现。所 选用的 AT89S51 单片机具有价格低廉程序写入方便的特点使得整个系统方便维护 和检修。除此之外，该系统只占用了单片机少量的 I /O 口和内存，为系统留下了功 能扩展的空间。 关键字：AT89S51 ；LED 点阵显示；串行通信 本科生毕业论文 II Desigen and Realization of the Lattice Screen of LED Based on MCS-5 1 Abstract: This paper introduces a design of the LED lattice display system base on MCU AT89S51. The system can display in both Chinese and English characters of the show and from top to bottom and move around the magic show. And can be cascaded to expand the screen size to achieve increased content purposes. The PC sends control commands and displays code to microcontroller, AT89S51 receives control commands from PC and shows the code, Driver module drives a 16×16-resolution LED lattice LED’s panel display scan showed. Communication between PC and the microcontroller using RS-232C communications standards. the characteristics that AT89S51 microcontroller is cheap and could be coded conveniently makes the whole system Convenient to Maintenance and Repair. In addition, the system will take up only a small amount of the MCU I/O and memory,so that the system has functional space for expansion. Key words: AT89S51, lattice LED’s panel display, serial communication 本科生毕业论文 III