毕业设计（论文）-回转式旋盖机设计_精品.doc

摘 要 回转式旋盖机适用于带螺纹的盖与瓶的旋盖，市场上现有的回转式旋盖机大多数是半自动的包装机，瓶盖的疏理大多用人来完成，生产效率不是很高，而且加大了劳动强度，再生产时有一定危险，本设计为自动理盖而且是多工位旋盖。 本文介绍了题目的研究背景和意义，论述了旋盖机在国内外的发展状况，介绍了本次设计研究的内容及方法。本次设计的重点是包装机的总体设计方案、包装过程的旋盖、输送方式和定位方法，在此基础上进行了运动与结构的设计。本次设计采用的包装方法是回转式的，是通过圆柱凸轮的轮廓线来实现旋盖头的上下往复运动的，通过行星轮系传递转矩的；而且在满足包装机械原理的条件下，充分考虑了整机的布局和经济性，同时该机还有结构简单、造价低、无污染、噪声小和人及功能合理的特点。 关键词：旋盖机；旋盖；输送。 Abstract Rotary Capping Machine for the threaded cap and the bottle of screw cap, as the existing rotary capping machines are mostly semi-automatic packaging machine, bottle of Reorganizing the employer to complete most of the production efficiency is not very high and increased labor intensity, have a certain risk of reproduction, the design for the automatic management is a multi-position cap and screw cap. This article describes the background and significance of the research topics discussed Capper development at home and abroad, introduces the design of this study the content and methods. The packaging machine is designed to focus the overall design scheme, the packaging process of screwing conveyance methods and positioning methods, in this based on the movement and structure design. The design of the packaging used is rotary, through cylindrical cam contour to achieve capping head up and down reciprocating motion through the planetary gear transmission torque; and packaging machinery to meet the conditions of principle, give full consideration to the machine layout and the economy, while machine is also simple, low cost, no pollution, noise and human and functional characteristics of reasonable. Keywords: Capping Machine; capping; delivery. 目 录 摘 要 I Abstract II 目 录 III 第1章 绪 论 1 1.1设计题目背景 1 1.2研究意义 1 1.3国内外相关情况 1 1.4选题意义 2 第2章 总体方案设计 3 2.1设计任务分析 3 2.1.1设计参数 3 2.1.2工艺路线 3 2.2功能分析 3 2.2.1总功能确定 3 2.2.2各功能分解 3 2.2.3功能结构确定 4 2.3功能求解 4 2.3.1分功能原理解 4 2.3.2系统方案求解 5 2.4 方案评价 5 2.5系统方案原理图 5 2.5.1各执行构件方案简图 5 2.5.2画总体方案简图 8 第3章 执行系统设计计算 9 3.1行星轮系的设计计算 9 3.2旋盖头的设计计算 10 3.3圆柱凸轮及行星轮的设计计算 10 3.4输送链设计计算 10 第4章 传动系统设计计算 12 4.1动力机的选择 12