毕业论文终稿-螺纹在线加工部件结构设计(通过答辩).doc

大学 毕业设计（论文） 课 题 名 称： 日期： 本次设计是对螺纹在线加工部件的设计。在这里主要包括: 的设计、进给部件的设计、部件系统的设计这次毕业设计对设计工作的基本技能的训练，提高了分析和解决工程技术问题的能力，并为进行一般机械的设计创造了一定条件。 整机结构主要由电动机产生动力通过联轴器将需要的动力传递到丝杆上，丝杆带动丝杆螺母，从而带动整机运动，提高劳动生产率和生产自动化水平。更显示其优越性，有着广阔的发展前途。 本论文研究内容： (1) 螺纹在线加工部件总体结构设计。 (2) 螺纹在线加工部件工作性能分析。 (3)电动机的选择。 (4) 螺纹在线加工部件的传动系统、执行部件及机架设计。 (5)对设计零件进行设计计算分析和校核。 (6)绘制整机装配图及重要部件装配图和设计零件的零件图。 螺纹在线加工部件，滚珠丝杠 Abstract This design is the design of the thread on-line processing parts.. Here mainly include: the ability to design and tool design of spindle box transmission mechanism, a feeding part of card tight component system the design of the graduation design on the design of the basic skills training, improve the analysis and solve engineering problems, and for general mechanical design created certain conditions. Whole structure mainly by the motor generate power through the coupling will need the power delivered to the screw rod and screw rod drives the screw rod nut, so as to drive the machine feed movement, and spindle box by secondary gear deceleration drive the spindle rotating motion, Improving labor productivity and production automation level. It has a broad prospect for its development.. Research content of this thesis: (1) the overall structure design of the online machining parts of the screw threads. (2) working performance analysis of the screw online working part. (3) motor selection. (4) the transmission system, the execution parts and the frame design of the thread processing parts. (5) design and calculation of the design parts for calculation and verification. (6) drawing the assembly drawings and important parts of the assembly drawings and parts drawings of the design parts. Key words: online processing parts, ball screw, feed drive, spindle box 目　　录 摘　要 II Abstract III 1　绪论 1 1.1 螺纹在线加工部件的要求 1 1.2 课题的目的及意义 1 1.3　国内外概况综述 3 1.4　本课题研究的内容及方法 4 1.4.1　主要的研究内容 4 1.4.2　设计要求 4 1.4.3　关键的技术问题 4 2　螺纹在线加工部件总体结构设计 5 2.1 螺纹在线加工部件的构成 5 2.2 螺纹在线加工部件的工作原理 5 2.3 钻孔的基本尺寸和切削用量 7 2.4 减速机构设计 10 3 进给结构及传