3GPP EPC(演进的分组核心网)白皮书.pptVIP

EPC 32 The 3GPP Evolved Packet Core White Paper Figure 6.4.2-1: X2-based handover 6.4.3 S1-based Handover S1 based handover is used in the cases when X2-based handover cannot be used, e.g. when source eNB and target eNB are served by different MMEs. During the handover preparation, the signalling information is exchanged between source eNB and target eNB via the involved MME(s), i.e. messages are sent via the S1 interfaces, and possibly via the S10 interface between the MMEs. In the following example flow both the MME and the S-G